FPGA Market

Obsolete device

XC6VSX315T replacement options

The AMD Xilinx XC6VSX315T belongs to a family that is no longer in production. There are two ways forward, and for most people reading this the first one is the answer: keep the design and source the part. Changing device means a board revision, so it is only worth it if you are redesigning anyway.

1. Keep the design — source the XC6VSX315T

Discontinued parts are still traded. We hold 20 orderable XC6VSX315T parts — send the exact code and quantity and we'll come back with stock and pricing, including date-code and traceability requirements.

Request a quote
Part numberPackagePinsSpeedTemperature
XC6VSX315T-1FF1156CFF11561156-1Commercial
XC6VSX315T-1FF1156IFF11561156-1Industrial
XC6VSX315T-2FF1156CFF11561156-2Commercial
XC6VSX315T-2FF1156IFF11561156-2Industrial
XC6VSX315T-3FF1156CFF11561156-3Commercial
XC6VSX315T-1FF1759CFF17591759-1Commercial
XC6VSX315T-1FF1759IFF17591759-1Industrial
XC6VSX315T-2FF1759CFF17591759-2Commercial
XC6VSX315T-2FF1759IFF17591759-2Industrial
XC6VSX315T-3FF1759CFF17591759-3Commercial
XC6VSX315T-1FFG1156CFFG115611561Commercial
XC6VSX315T-1FFG1156IFFG115611561Industrial
XC6VSX315T-2FFG1156CFFG115611562Commercial
XC6VSX315T-2FFG1156IFFG115611562Industrial
XC6VSX315T-3FFG1156CFFG115611563Commercial
XC6VSX315T-1FFG1759CFFG175917591Commercial

All 20 XC6VSX315T parts

A different package or speed grade of the same device is the closest thing to a like-for-like change: the silicon is the same, so only the footprint or timing differs. It still needs checking against your board.

2. Redesigning? Current devices of similar capacity

AMD Xilinx devices still in production with comparable logic capacity, closest first. These are a shortlist to evaluate, not equivalents: none of them is pin-compatible with the XC6VSX315T, and none is recommended by the manufacturer as its successor. We select them by capacity from the data on this site.

DeviceFamilyLogic Cellsvs XC6VSX315TBlock RAMDSPParts
XC6VSX315TVirtex-6314,880The original25,344 Kb20
XCKU025Kintex UltraScale+318,000About the same Logic Cells13,004 Kb1,1524
XC7K325TKintex-7326,0801.0× the Logic Cells16,020 Kb84029
XC7VX330TVirtex-7326,4001.0× the Logic Cells27,000 Kb1,12013
XCKU3PKintex UltraScale+355,9501.1× the Logic Cells12,960 Kb1,36822
XC7K355TKintex-7356,1601.1× the Logic Cells25,740 Kb1,4406
XC7K410TKintex-7406,7201.3× the Logic Cells28,620 Kb1,54024

What to check before changing device

  • Footprint and pinout

    Ball count, pitch and pin assignment all differ between families. A new device means a new layout.

  • I/O voltages and banks

    Supported I/O standards, bank voltages and the number of banks change between generations.

  • Core and I/O supplies

    Newer devices usually run a lower core voltage and need a different power tree.

  • Configuration

    Flash type, configuration mode and boot timing are family-specific.

  • Tools and IP

    The design has to be rebuilt in the current toolchain, and IP cores may need replacing or re-licensing.

  • Temperature and lifetime

    Check the grade you need exists, and how long the new family is expected to stay in production.

Where a design cannot be revised — certified equipment, long-life industrial and defence builds — sourcing the original is normally the cheaper route, even at obsolete pricing.

Guides and comparisons