FPGA Market

Obsolete device

XC6VLX550T replacement options

The AMD Xilinx XC6VLX550T has been declared end of life by the manufacturer. There are two ways forward, and for most people reading this the first one is the answer: keep the design and source the part. Changing device means a board revision, so it is only worth it if you are redesigning anyway.

1. Keep the design — source the XC6VLX550T

Discontinued parts are still traded. We hold 14 orderable XC6VLX550T parts — send the exact code and quantity and we'll come back with stock and pricing, including date-code and traceability requirements.

Request a quote
Part numberPackagePinsSpeedTemperature
XC6VLX550T-1FF1759CFF17591759-1Commercial
XC6VLX550T-1FF1759IFF17591759-1Industrial
XC6VLX550T-2FF1759CFF17591759-2Commercial
XC6VLX550T-2FF1759IFF17591759-2Industrial
XC6VLX550T-3FF1759CFF17591759-3Commercial
XC6VLX550T-1FF1760CFF17601760-1Commercial
XC6VLX550T-1FF1760IFF17601760-1Industrial
XC6VLX550T-2FF1760CFF17601760-2Commercial
XC6VLX550T-2FF1760IFF17601760-2Industrial
XC6VLX550T-3FF1760CFF17601760-3Commercial
XC6VLX550T-1FFG1759CFFG175917591Commercial
XC6VLX550T-1FFG1759IFFG175917591Industrial
XC6VLX550T-2FFG1759CFFG175917592Commercial
XC6VLX550T-2FFG1760CFFG17602Commercial

A different package or speed grade of the same device is the closest thing to a like-for-like change: the silicon is the same, so only the footprint or timing differs. It still needs checking against your board.

2. Redesigning? Current devices of similar capacity

AMD Xilinx devices still in production with comparable logic capacity, closest first. These are a shortlist to evaluate, not equivalents: none of them is pin-compatible with the XC6VLX550T, and none is recommended by the manufacturer as its successor. We select them by capacity from the data on this site.

DeviceFamilyLogic Cellsvs XC6VLX550TBlock RAMDSPParts
XC6VLX550TVirtex-6549,888The original22,752 Kb14
XC7VX550TVirtex-7554,240About the same Logic Cells42,480 Kb2,8807
XC7VH580TVirtex-7580,4801.1× the Logic Cells33,840 Kb9
XC7V585TVirtex-7582,7201.1× the Logic Cells28,620 Kb1,26011
XCZU9EGZynq UltraScale+ MPSoC599,5501.1× the Logic Cells32,832 Kb2,52010
XCZU9CGZynq UltraScale+ MPSoC599,5501.1× the Logic Cells32,832 Kb2,5208
XCKU9PKintex UltraScale+599,5501.1× the Logic Cells32,832 Kb2,5206

What to check before changing device

  • Footprint and pinout

    Ball count, pitch and pin assignment all differ between families. A new device means a new layout.

  • I/O voltages and banks

    Supported I/O standards, bank voltages and the number of banks change between generations.

  • Core and I/O supplies

    Newer devices usually run a lower core voltage and need a different power tree.

  • Configuration

    Flash type, configuration mode and boot timing are family-specific.

  • Tools and IP

    The design has to be rebuilt in the current toolchain, and IP cores may need replacing or re-licensing.

  • Temperature and lifetime

    Check the grade you need exists, and how long the new family is expected to stay in production.

Where a design cannot be revised — certified equipment, long-life industrial and defence builds — sourcing the original is normally the cheaper route, even at obsolete pricing.

Guides and comparisons