FPGA Market

Obsolete device

XC6VLX130T replacement options

The AMD Xilinx XC6VLX130T belongs to a family that is no longer in production. There are two ways forward, and for most people reading this the first one is the answer: keep the design and source the part. Changing device means a board revision, so it is only worth it if you are redesigning anyway.

1. Keep the design — source the XC6VLX130T

Discontinued parts are still traded. We hold 29 orderable XC6VLX130T parts — send the exact code and quantity and we'll come back with stock and pricing, including date-code and traceability requirements.

Request a quote
Part numberPackagePinsSpeedTemperature
XC6VLX130T-1FF1156CFF11561156-1Commercial
XC6VLX130T-1FF1156IFF11561156-1Industrial
XC6VLX130T-2FF1156CFF11561156-2Commercial
XC6VLX130T-2FF1156IFF11561156-2Industrial
XC6VLX130T-3FF1156CFF11561156-3Commercial
XC6VLX130T-1FF484CFF484484-1Commercial
XC6VLX130T-1FF484IFF484484-1Industrial
XC6VLX130T-2FF484CFF484484-2Commercial
XC6VLX130T-2FF484IFF484484-2Industrial
XC6VLX130T-3FF484CFF484484-3Commercial
XC6VLX130T-1FF784CFF784784-1Commercial
XC6VLX130T-1FF784IFF784784-1Industrial
XC6VLX130T-2FF784CFF784784-2Commercial
XC6VLX130T-2FF784IFF784784-2Industrial
XC6VLX130T-3FF784CFF784784-3Commercial
XC6VLX130T-1FFG1156CFFG115611561Commercial

All 29 XC6VLX130T parts

A different package or speed grade of the same device is the closest thing to a like-for-like change: the silicon is the same, so only the footprint or timing differs. It still needs checking against your board.

2. Redesigning? Current devices of similar capacity

AMD Xilinx devices still in production with comparable logic capacity, closest first. These are a shortlist to evaluate, not equivalents: none of them is pin-compatible with the XC6VLX130T, and none is recommended by the manufacturer as its successor. We select them by capacity from the data on this site.

DeviceFamilyLogic Cellsvs XC6VLX130TBlock RAMDSPParts
XC6VLX130TVirtex-6128,000The original9,504 Kb29
XCSU150PSpartan UltraScale+137,8131.1× the Logic Cells6,048 Kb3844
XCZU3EGZynq UltraScale+ MPSoC154,3501.2× the Logic Cells7,776 Kb36012
XCZU3CGZynq UltraScale+ MPSoC154,3501.2× the Logic Cells7,776 Kb36010
XAZU3EGZynq UltraScale+ MPSoC154,3501.2× the Logic Cells7,776 Kb3603
XC7K160TKintex-7162,2401.3× the Logic Cells11,700 Kb60023
XA7K160TKintex-7162,2401.3× the Logic Cells11,700 Kb1

Substitutes listed by distributors

Parts distributors list as substitutes for the XC6VLX130T. This is what the trade buys instead — not a manufacturer equivalence, and some are other vendors' silicon entirely. Check any of them against your design.

What to check before changing device

  • Footprint and pinout

    Ball count, pitch and pin assignment all differ between families. A new device means a new layout.

  • I/O voltages and banks

    Supported I/O standards, bank voltages and the number of banks change between generations.

  • Core and I/O supplies

    Newer devices usually run a lower core voltage and need a different power tree.

  • Configuration

    Flash type, configuration mode and boot timing are family-specific.

  • Tools and IP

    The design has to be rebuilt in the current toolchain, and IP cores may need replacing or re-licensing.

  • Temperature and lifetime

    Check the grade you need exists, and how long the new family is expected to stay in production.

Where a design cannot be revised — certified equipment, long-life industrial and defence builds — sourcing the original is normally the cheaper route, even at obsolete pricing.

Guides and comparisons