FPGA Market

Obsolete device

XC6VHX255T replacement options

The AMD Xilinx XC6VHX255T has been declared end of life by the manufacturer. There are two ways forward, and for most people reading this the first one is the answer: keep the design and source the part. Changing device means a board revision, so it is only worth it if you are redesigning anyway.

1. Keep the design — source the XC6VHX255T

Discontinued parts are still traded. We hold 15 orderable XC6VHX255T parts — send the exact code and quantity and we'll come back with stock and pricing, including date-code and traceability requirements.

Request a quote
Part numberPackagePinsSpeedTemperature
XC6VHX255T-1FF1155CFF11551155-1Commercial
XC6VHX255T-1FF1155IFF11551155-1Industrial
XC6VHX255T-2FF1155CFF11551155-2Commercial
XC6VHX255T-2FF1155IFF11551155-2Industrial
XC6VHX255T-3FF1155CFF11551155-3Commercial
XC6VHX255T-1FF1923CFF19231923-1Commercial
XC6VHX255T-1FF1923IFF19231923-1Industrial
XC6VHX255T-2FF1923CFF19231923-2Commercial
XC6VHX255T-2FF1923IFF19231923-2Industrial
XC6VHX255T-3FF1923CFF19231923-3Commercial
XC6VHX255T-1FFG1155CFFG11551Commercial
XC6VHX255T-1FFG1155IFFG11551Industrial
XC6VHX255T-2FFG1155CFFG11552Commercial
XC6VHX255T-2FFG1155IFFG11552Industrial
XC6VHX255T-2FFG1923CFFG192319242Commercial

A different package or speed grade of the same device is the closest thing to a like-for-like change: the silicon is the same, so only the footprint or timing differs. It still needs checking against your board.

2. Redesigning? Current devices of similar capacity

AMD Xilinx devices still in production with comparable logic capacity, closest first. These are a shortlist to evaluate, not equivalents: none of them is pin-compatible with the XC6VHX255T, and none is recommended by the manufacturer as its successor. We select them by capacity from the data on this site.

DeviceFamilyLogic cellsvs XC6VHX255TBlock RAMDSPParts
XC6VHX255TVirtex-6253,440The original18,576 Kb15
XCZU5EGZynq UltraScale+ MPSoC256,200About the same logic cells5,184 Kb1,24810
XCZU5EVZynq UltraScale+ MPSoC256,200About the same logic cells5,184 Kb1,2489
XCZU5CGZynq UltraScale+ MPSoC256,200About the same logic cells5,184 Kb1,2488
XAZU5EVZynq UltraScale+ MPSoC256,200About the same logic cells5,184 Kb1,2481
XCAU25PArtix UltraScale+308,4371.2× the logic cells10,800 Kb1,20010
XCKU025Kintex UltraScale+318,0001.3× the logic cells13,004 Kb1,1524

What to check before changing device

  • Footprint and pinout

    Ball count, pitch and pin assignment all differ between families. A new device means a new layout.

  • I/O voltages and banks

    Supported I/O standards, bank voltages and the number of banks change between generations.

  • Core and I/O supplies

    Newer devices usually run a lower core voltage and need a different power tree.

  • Configuration

    Flash type, configuration mode and boot timing are family-specific.

  • Tools and IP

    The design has to be rebuilt in the current toolchain, and IP cores may need replacing or re-licensing.

  • Temperature and lifetime

    Check the grade you need exists, and how long the new family is expected to stay in production.

Where a design cannot be revised — certified equipment, long-life industrial and defence builds — sourcing the original is normally the cheaper route, even at obsolete pricing.

Guides and comparisons