FPGA Market

Obsolete device

XC5VFX100T replacement options

The AMD Xilinx XC5VFX100T belongs to a family that is no longer in production. There are two ways forward, and for most people reading this the first one is the answer: keep the design and source the part. Changing device means a board revision, so it is only worth it if you are redesigning anyway.

1. Keep the design — source the XC5VFX100T

Discontinued parts are still traded. We hold 16 orderable XC5VFX100T parts — send the exact code and quantity and we'll come back with stock and pricing, including date-code and traceability requirements.

Request a quote
Part numberPackagePinsSpeedTemperature
XC5VFX100T-1FF1136CFF11361136-1Commercial
XC5VFX100T-1FF1136IFF11361136-1Industrial
XC5VFX100T-2FF1136CFF11361136-2Commercial
XC5VFX100T-2FF1136IFF11361136-2Industrial
XC5VFX100T-3FF1136CFF11361136-3Commercial
XC5VFX100T-1FF1738CFF17381738-1Commercial
XC5VFX100T-1FF1738IFF17381738-1Industrial
XC5VFX100T-2FF1738CFF17381738-2Commercial
XC5VFX100T-2FF1738IFF17381738-2Industrial
XC5VFX100T-3FF1738CFF17381738-3Commercial
XC5VFX100T-1FFG1136CFFG113611361Commercial
XC5VFX100T-1FFG1136IFFG113611361Industrial
XC5VFX100T-2FFG1136CFFG113611362Commercial
XC5VFX100T-2FFG1136IFFG113611362Industrial
XC5VFX100T-1FFG1738CFFG173817381Commercial
XC5VFX100T-1FFG1738IFFG173817381Industrial

A different package or speed grade of the same device is the closest thing to a like-for-like change: the silicon is the same, so only the footprint or timing differs. It still needs checking against your board.

2. Redesigning? Current devices of similar capacity

AMD Xilinx devices still in production with comparable logic capacity, closest first. These are a shortlist to evaluate, not equivalents: none of them is pin-compatible with the XC5VFX100T, and none is recommended by the manufacturer as its successor. We select them by capacity from the data on this site.

DeviceFamilyLogic Cellsvs XC5VFX100TBlock RAMDSPParts
XC5VFX100TVirtex-5102,400The original8,208 Kb16
XC7S100Spartan-7102,400About the same Logic Cells4,320 Kb1609
XA7S100Spartan-7102,400About the same Logic Cells4,320 Kb1604
XCZU2CGZynq UltraScale+ MPSoC103,320About the same Logic Cells5,400 Kb24011
XAZU2EGZynq UltraScale+ MPSoC103,320About the same Logic Cells5,400 Kb2402
XCSU150PSpartan UltraScale+137,8131.3× the Logic Cells6,048 Kb3844
XCZU3EGZynq UltraScale+ MPSoC154,3501.5× the Logic Cells7,776 Kb36012

What to check before changing device

  • Footprint and pinout

    Ball count, pitch and pin assignment all differ between families. A new device means a new layout.

  • I/O voltages and banks

    Supported I/O standards, bank voltages and the number of banks change between generations.

  • Core and I/O supplies

    Newer devices usually run a lower core voltage and need a different power tree.

  • Configuration

    Flash type, configuration mode and boot timing are family-specific.

  • Tools and IP

    The design has to be rebuilt in the current toolchain, and IP cores may need replacing or re-licensing.

  • Temperature and lifetime

    Check the grade you need exists, and how long the new family is expected to stay in production.

Where a design cannot be revised — certified equipment, long-life industrial and defence builds — sourcing the original is normally the cheaper route, even at obsolete pricing.

Guides and comparisons