FPGA Market

Obsolete device

XCS40 replacement options

The AMD Xilinx XCS40 has been discontinued by the manufacturer. There are two ways forward, and for most people reading this the first one is the answer: keep the design and source the part. Changing device means a board revision, so it is only worth it if you are redesigning anyway.

1. Keep the design — source the XCS40

Discontinued parts are still traded. We hold 7 orderable XCS40 parts — send the exact code and quantity and we'll come back with stock and pricing, including date-code and traceability requirements.

Request a quote
Part numberPackagePinsSpeedTemperature
XCS40-3BG256CBG2562563Commercial
XCS40-4BG256CBG2562564Commercial
XCS40-3PQ208CPQ2082083Commercial
XCS40-3PQ208IPQ2082083Industrial
XCS40-4PQ208CPQ2082084Commercial
XCS40-3PQ240CPQ2402403Commercial
XCS40-4PQ240CPQ2402404Commercial

A different package or speed grade of the same device is the closest thing to a like-for-like change: the silicon is the same, so only the footprint or timing differs. It still needs checking against your board.

2. Redesigning? Current devices of similar capacity

AMD Xilinx devices still in production with comparable logic capacity, closest first. These are a shortlist to evaluate, not equivalents: none of them is pin-compatible with the XCS40, and none is recommended by the manufacturer as its successor. We select them by capacity from the data on this site.

DeviceFamilyLogic cellsvs XCS40Block RAMDSPParts
XCS40Spartan and Spartan-XL1,862The original24 Kb7
XC7S6Spartan-76,0003.2× the logic cells180 Kb1014
XA7S6Spartan-76,0003.2× the logic cells180 Kb102
XCSU10PSpartan UltraScale+10,9385.9× the logic cells1,728 Kb244

What to check before changing device

  • Footprint and pinout

    Ball count, pitch and pin assignment all differ between families. A new device means a new layout.

  • I/O voltages and banks

    Supported I/O standards, bank voltages and the number of banks change between generations.

  • Core and I/O supplies

    Newer devices usually run a lower core voltage and need a different power tree.

  • Configuration

    Flash type, configuration mode and boot timing are family-specific.

  • Tools and IP

    The design has to be rebuilt in the current toolchain, and IP cores may need replacing or re-licensing.

  • Temperature and lifetime

    Check the grade you need exists, and how long the new family is expected to stay in production.

Where a design cannot be revised — certified equipment, long-life industrial and defence builds — sourcing the original is normally the cheaper route, even at obsolete pricing.

Guides and comparisons