FPGA Market

Obsolete device

XC6VSX475T replacement options

The AMD Xilinx XC6VSX475T belongs to a family that is no longer in production. There are two ways forward, and for most people reading this the first one is the answer: keep the design and source the part. Changing device means a board revision, so it is only worth it if you are redesigning anyway.

1. Keep the design — source the XC6VSX475T

Discontinued parts are still traded. We hold 17 orderable XC6VSX475T parts — send the exact code and quantity and we'll come back with stock and pricing, including date-code and traceability requirements.

Request a quote
Part numberPackagePinsSpeedTemperature
XC6VSX475T-1FF1156CFF11561156-1Commercial
XC6VSX475T-1FF1156IFF11561156-1Industrial
XC6VSX475T-2FF1156CFF11561156-2Commercial
XC6VSX475T-2FF1156IFF11561156-2Industrial
XC6VSX475T-3FF1156CFF11561156-3Commercial
XC6VSX475T-1FF1759CFF17591759-1Commercial
XC6VSX475T-1FF1759IFF17591759-1Industrial
XC6VSX475T-2FF1759CFF17591759-2Commercial
XC6VSX475T-2FF1759IFF17591759-2Industrial
XC6VSX475T-3FF1759CFF17591759-3Commercial
XC6VSX475T-1FFG1156CFFG11561Commercial
XC6VSX475T-1FFG1156IFFG115611561Industrial
XC6VSX475T-2FFG1156CFFG115611562Commercial
XC6VSX475T-1FFG1759CFFG17591Commercial
XC6VSX475T-1FFG1759IFFG175917591Industrial
XC6VSX475T-2FFG1759CFFG175917592Commercial

All 17 XC6VSX475T parts

A different package or speed grade of the same device is the closest thing to a like-for-like change: the silicon is the same, so only the footprint or timing differs. It still needs checking against your board.

2. Redesigning? Current devices of similar capacity

AMD Xilinx devices still in production with comparable logic capacity, closest first. These are a shortlist to evaluate, not equivalents: none of them is pin-compatible with the XC6VSX475T, and none is recommended by the manufacturer as its successor. We select them by capacity from the data on this site.

DeviceFamilyLogic Cellsvs XC6VSX475TBlock RAMDSPParts
XC6VSX475TVirtex-6476,160The original38,304 Kb17
XC7K480TKintex-7477,760About the same Logic Cells34,380 Kb1,9209
XC7VX485TVirtex-7485,760About the same Logic Cells37,080 Kb2,80028
XCZU7EGZynq UltraScale+ MPSoC504,0001.1× the Logic Cells11,232 Kb1,72814
XCZU7EVZynq UltraScale+ MPSoC504,0001.1× the Logic Cells11,232 Kb1,72814
XCZU7CGZynq UltraScale+ MPSoC504,0001.1× the Logic Cells11,232 Kb1,72812
XCKU040Kintex UltraScale+530,0001.1× the Logic Cells21,606 Kb1,92020

What to check before changing device

  • Footprint and pinout

    Ball count, pitch and pin assignment all differ between families. A new device means a new layout.

  • I/O voltages and banks

    Supported I/O standards, bank voltages and the number of banks change between generations.

  • Core and I/O supplies

    Newer devices usually run a lower core voltage and need a different power tree.

  • Configuration

    Flash type, configuration mode and boot timing are family-specific.

  • Tools and IP

    The design has to be rebuilt in the current toolchain, and IP cores may need replacing or re-licensing.

  • Temperature and lifetime

    Check the grade you need exists, and how long the new family is expected to stay in production.

Where a design cannot be revised — certified equipment, long-life industrial and defence builds — sourcing the original is normally the cheaper route, even at obsolete pricing.

Guides and comparisons