FPGA Market

Obsolete device

XC6VHX380T replacement options

The AMD Xilinx XC6VHX380T has been declared end of life by the manufacturer. There are two ways forward, and for most people reading this the first one is the answer: keep the design and source the part. Changing device means a board revision, so it is only worth it if you are redesigning anyway.

1. Keep the design — source the XC6VHX380T

Discontinued parts are still traded. We hold 29 orderable XC6VHX380T parts — send the exact code and quantity and we'll come back with stock and pricing, including date-code and traceability requirements.

Request a quote
Part numberPackagePinsSpeedTemperature
XC6VHX380T-1FF1154CFF11541154-1Commercial
XC6VHX380T-1FF1154IFF11541154-1Industrial
XC6VHX380T-2FF1154CFF11541154-2Commercial
XC6VHX380T-2FF1154IFF11541154-2Industrial
XC6VHX380T-3FF1154CFF11541154-3Commercial
XC6VHX380T-1FF1155CFF11551155-1Commercial
XC6VHX380T-1FF1155IFF11551155-1Industrial
XC6VHX380T-2FF1155CFF11551155-2Commercial
XC6VHX380T-2FF1155IFF11551155-2Industrial
XC6VHX380T-3FF1155CFF11551155-3Commercial
XC6VHX380T-1FF1923CFF19231923-1Commercial
XC6VHX380T-1FF1923IFF19231923-1Industrial
XC6VHX380T-2FF1923CFF19231923-2Commercial
XC6VHX380T-2FF1923IFF19231923-2Industrial
XC6VHX380T-3FF1923CFF19231923-3Commercial
XC6VHX380T-1FF1924CFF19241924-1Commercial

All 29 XC6VHX380T parts

A different package or speed grade of the same device is the closest thing to a like-for-like change: the silicon is the same, so only the footprint or timing differs. It still needs checking against your board.

2. Redesigning? Current devices of similar capacity

AMD Xilinx devices still in production with comparable logic capacity, closest first. These are a shortlist to evaluate, not equivalents: none of them is pin-compatible with the XC6VHX380T, and none is recommended by the manufacturer as its successor. We select them by capacity from the data on this site.

DeviceFamilyLogic cellsvs XC6VHX380TBlock RAMDSPParts
XC6VHX380TVirtex-6382,464The original27,648 Kb29
XC7K410TKintex-7406,7201.1× the logic cells28,620 Kb1,54024
XC7VX415TVirtex-7412,1601.1× the logic cells31,680 Kb2,16015
XC7K420TKintex-7416,9601.1× the logic cells30,060 Kb1,68010
XCKU035Kintex UltraScale+444,0001.2× the logic cells19,456 Kb1,70020
XCZU6EGZynq UltraScale+ MPSoC469,4461.2× the logic cells25,704 Kb1,9739
XCZU6CGZynq UltraScale+ MPSoC469,4461.2× the logic cells25,704 Kb1,9738

What to check before changing device

  • Footprint and pinout

    Ball count, pitch and pin assignment all differ between families. A new device means a new layout.

  • I/O voltages and banks

    Supported I/O standards, bank voltages and the number of banks change between generations.

  • Core and I/O supplies

    Newer devices usually run a lower core voltage and need a different power tree.

  • Configuration

    Flash type, configuration mode and boot timing are family-specific.

  • Tools and IP

    The design has to be rebuilt in the current toolchain, and IP cores may need replacing or re-licensing.

  • Temperature and lifetime

    Check the grade you need exists, and how long the new family is expected to stay in production.

Where a design cannot be revised — certified equipment, long-life industrial and defence builds — sourcing the original is normally the cheaper route, even at obsolete pricing.

Guides and comparisons