FPGA Market

Obsolete device

XC5VLX30 replacement options

The AMD Xilinx XC5VLX30 belongs to a family that is no longer in production. There are two ways forward, and for most people reading this the first one is the answer: keep the design and source the part. Changing device means a board revision, so it is only worth it if you are redesigning anyway.

1. Keep the design — source the XC5VLX30

Discontinued parts are still traded. We hold 18 orderable XC5VLX30 parts — send the exact code and quantity and we'll come back with stock and pricing, including date-code and traceability requirements.

Request a quote
Part numberPackagePinsSpeedTemperature
XC5VLX30-1FF324CFF324324-1Commercial
XC5VLX30-1FF324IFF324324-1Industrial
XC5VLX30-2FF324CFF324324-2Commercial
XC5VLX30-2FF324IFF324324-2Industrial
XC5VLX30-3FF324CFF324324-3Commercial
XC5VLX30-1FF676CFF676676-1Commercial
XC5VLX30-1FF676IFF676676-1Industrial
XC5VLX30-2FF676CFF676676-2Commercial
XC5VLX30-2FF676IFF676676-2Industrial
XC5VLX30-3FF676CFF676676-3Commercial
XC5VLX30-1FFG324CFFG3243241Commercial
XC5VLX30-1FFG324IFFG3243241Industrial
XC5VLX30-3FFG324CFFG3243243Commercial
XC5VLX30-1FFG676CFFG6766761Commercial
XC5VLX30-1FFG676IFFG6766761Industrial
XC5VLX30-2FFG676CFFG6766762Commercial

All 18 XC5VLX30 parts

A different package or speed grade of the same device is the closest thing to a like-for-like change: the silicon is the same, so only the footprint or timing differs. It still needs checking against your board.

2. Redesigning? Current devices of similar capacity

AMD Xilinx devices still in production with comparable logic capacity, closest first. These are a shortlist to evaluate, not equivalents: none of them is pin-compatible with the XC5VLX30, and none is recommended by the manufacturer as its successor. We select them by capacity from the data on this site.

DeviceFamilyLogic Cellsvs XC5VLX30Block RAMDSPParts
XC5VLX30Virtex-530,720The original1,152 Kb18
XC7A35TArtix-733,2801.1× the Logic Cells1,800 Kb9028
XA7A35TArtix-733,2801.1× the Logic Cells1,800 Kb6
XCSU35PSpartan UltraScale+35,7001.2× the Logic Cells1,728 Kb487
XC7A50TArtix-752,1601.7× the Logic Cells2,700 Kb12030
XC7S50Spartan-752,1601.7× the Logic Cells2,700 Kb12015
XA7A50TArtix-752,1601.7× the Logic Cells2,700 Kb8

What to check before changing device

  • Footprint and pinout

    Ball count, pitch and pin assignment all differ between families. A new device means a new layout.

  • I/O voltages and banks

    Supported I/O standards, bank voltages and the number of banks change between generations.

  • Core and I/O supplies

    Newer devices usually run a lower core voltage and need a different power tree.

  • Configuration

    Flash type, configuration mode and boot timing are family-specific.

  • Tools and IP

    The design has to be rebuilt in the current toolchain, and IP cores may need replacing or re-licensing.

  • Temperature and lifetime

    Check the grade you need exists, and how long the new family is expected to stay in production.

Where a design cannot be revised — certified equipment, long-life industrial and defence builds — sourcing the original is normally the cheaper route, even at obsolete pricing.

Guides and comparisons