FPGA Market

Obsolete device

XC5VLX155T replacement options

The AMD Xilinx XC5VLX155T belongs to a family that is no longer in production. There are two ways forward, and for most people reading this the first one is the answer: keep the design and source the part. Changing device means a board revision, so it is only worth it if you are redesigning anyway.

1. Keep the design — source the XC5VLX155T

Discontinued parts are still traded. We hold 18 orderable XC5VLX155T parts — send the exact code and quantity and we'll come back with stock and pricing, including date-code and traceability requirements.

Request a quote
Part numberPackagePinsSpeedTemperature
XC5VLX155T-1FF1136CFF11361136-1Commercial
XC5VLX155T-1FF1136IFF11361136-1Industrial
XC5VLX155T-2FF1136CFF11361136-2Commercial
XC5VLX155T-2FF1136IFF11361136-2Industrial
XC5VLX155T-3FF1136CFF11361136-3Commercial
XC5VLX155T-1FF1738CFF17381738-1Commercial
XC5VLX155T-1FF1738IFF17381738-1Industrial
XC5VLX155T-2FF1738CFF17381738-2Commercial
XC5VLX155T-2FF1738IFF17381738-2Industrial
XC5VLX155T-3FF1738CFF17381738-3Commercial
XC5VLX155T-1FFG1136CFFG113611361Commercial
XC5VLX155T-1FFG1136IFFG113611361Industrial
XC5VLX155T-2FFG1136CFFG113611362Commercial
XC5VLX155T-2FFG1136IFFG113611362Industrial
XC5VLX155T-3FFG1136CFFG113611363Commercial
XC5VLX155T-1FFG1738CFFG173817381Commercial

All 18 XC5VLX155T parts

A different package or speed grade of the same device is the closest thing to a like-for-like change: the silicon is the same, so only the footprint or timing differs. It still needs checking against your board.

2. Redesigning? Current devices of similar capacity

AMD Xilinx devices still in production with comparable logic capacity, closest first. These are a shortlist to evaluate, not equivalents: none of them is pin-compatible with the XC5VLX155T, and none is recommended by the manufacturer as its successor. We select them by capacity from the data on this site.

DeviceFamilyLogic Cellsvs XC5VLX155TBlock RAMDSPParts
XC5VLX155TVirtex-5155,648The original7,632 Kb18
XC7K160TKintex-7162,2401.0× the Logic Cells11,700 Kb60023
XA7K160TKintex-7162,2401.0× the Logic Cells11,700 Kb1
XCAU15PArtix UltraScale+170,1001.1× the Logic Cells5,184 Kb57610
XAAU15PArtix UltraScale+170,1001.1× the Logic Cells5,184 Kb5762
XCZU4EGZynq UltraScale+ MPSoC192,1501.2× the Logic Cells4,608 Kb7289
XCZU4EVZynq UltraScale+ MPSoC192,1501.2× the Logic Cells4,608 Kb7289

What to check before changing device

  • Footprint and pinout

    Ball count, pitch and pin assignment all differ between families. A new device means a new layout.

  • I/O voltages and banks

    Supported I/O standards, bank voltages and the number of banks change between generations.

  • Core and I/O supplies

    Newer devices usually run a lower core voltage and need a different power tree.

  • Configuration

    Flash type, configuration mode and boot timing are family-specific.

  • Tools and IP

    The design has to be rebuilt in the current toolchain, and IP cores may need replacing or re-licensing.

  • Temperature and lifetime

    Check the grade you need exists, and how long the new family is expected to stay in production.

Where a design cannot be revised — certified equipment, long-life industrial and defence builds — sourcing the original is normally the cheaper route, even at obsolete pricing.

Guides and comparisons