FPGA Market

Obsolete device

EP3SE260 replacement options

The Intel EP3SE260 has been discontinued by the manufacturer. There are two ways forward, and for most people reading this the first one is the answer: keep the design and source the part. Changing device means a board revision, so it is only worth it if you are redesigning anyway.

1. Keep the design — source the EP3SE260

Discontinued parts are still traded. We hold 57 orderable EP3SE260 parts — send the exact code and quantity and we'll come back with stock and pricing, including date-code and traceability requirements.

Request a quote
Part numberPackagePinsSpeedTemperature
EP3SE260F1152C2F115211522Commercial
EP3SE260F1152C2NF115211522Commercial
EP3SE260F1152C2GF11522Commercial
EP3SE260F1152C3F115211523Commercial
EP3SE260F1152C3NF115211523Commercial
EP3SE260F1152I3GF11523Industrial
EP3SE260F1152I3F115211523Industrial
EP3SE260F1152I3NF115211523Industrial
EP3SE260F1152C4LGF11524Commercial
EP3SE260F1152C4GF11524Commercial
EP3SE260F1152C4LF115211524Commercial
EP3SE260F1152C4NF115211524Commercial
EP3SE260F1152C4LNF115211524Commercial
EP3SE260F1152C4F115211524Commercial
EP3SE260F1152I4GF11524Industrial
EP3SE260F1152I4LGF11524Industrial

All 57 EP3SE260 parts

A different package or speed grade of the same device is the closest thing to a like-for-like change: the silicon is the same, so only the footprint or timing differs. It still needs checking against your board.

2. Redesigning? Current devices of similar capacity

Intel devices still in production with comparable logic capacity, closest first. These are a shortlist to evaluate, not equivalents: none of them is pin-compatible with the EP3SE260, and none is recommended by the manufacturer as its successor. We select them by capacity from the data on this site.

DeviceFamilyLogic elementsvs EP3SE260Block RAMDSPParts
EP3SE260Stratix III Enhanced255,000The original16,282 Kb57
5AGXBB1D4Arria V GX300,0001.2× the logic elements16,952 Kb11
5AGXMB1G4Arria V GX300,0001.2× the logic elements16,952 Kb9
5AGXFB1H4Arria V GX300,0001.2× the logic elements16,952 Kb8
5AGXBB1D6Arria V GX300,0001.2× the logic elements16,952 Kb4
5AGXFB1H6Arria V GX300,0001.2× the logic elements16,952 Kb3
5AGXMB1G6Arria V GX300,0001.2× the logic elements16,952 Kb3

Substitutes listed by distributors

Parts distributors list as substitutes for the EP3SE260. This is what the trade buys instead — not a manufacturer equivalence, and some are other vendors' silicon entirely. Check any of them against your design.

What to check before changing device

  • Footprint and pinout

    Ball count, pitch and pin assignment all differ between families. A new device means a new layout.

  • I/O voltages and banks

    Supported I/O standards, bank voltages and the number of banks change between generations.

  • Core and I/O supplies

    Newer devices usually run a lower core voltage and need a different power tree.

  • Configuration

    Flash type, configuration mode and boot timing are family-specific.

  • Tools and IP

    The design has to be rebuilt in the current toolchain, and IP cores may need replacing or re-licensing.

  • Temperature and lifetime

    Check the grade you need exists, and how long the new family is expected to stay in production.

Where a design cannot be revised — certified equipment, long-life industrial and defence builds — sourcing the original is normally the cheaper route, even at obsolete pricing.

Guides and comparisons