FPGA Market

Obsolete device

GAL26V12C replacement options

The Lattice GAL26V12C has been discontinued by the manufacturer. There are two ways forward, and for most people reading this the first one is the answer: keep the design and source the part. Changing device means a board revision, so it is only worth it if you are redesigning anyway.

1. Keep the design — source the GAL26V12C

Discontinued parts are still traded. We hold 8 orderable GAL26V12C parts — send the exact code and quantity and we'll come back with stock and pricing, including date-code and traceability requirements.

Request a quote
Part numberPackagePinsSpeedTemperature
GAL26V12C-10LJILJ2810Industrial
GAL26V12C-10LJLJ2810
GAL26V12C-15LJILJ2815Industrial
GAL26V12C-15LJLJ2815
GAL26V12C-20LJILJ2820Industrial
GAL26V12C-20LJLJ2820
GAL26V12C-7LJLJ287
GAL26V12C-20LPILP2820Industrial

A different package or speed grade of the same device is the closest thing to a like-for-like change: the silicon is the same, so only the footprint or timing differs. It still needs checking against your board.

What to check before changing device

  • Footprint and pinout

    Ball count, pitch and pin assignment all differ between families. A new device means a new layout.

  • I/O voltages and banks

    Supported I/O standards, bank voltages and the number of banks change between generations.

  • Core and I/O supplies

    Newer devices usually run a lower core voltage and need a different power tree.

  • Configuration

    Flash type, configuration mode and boot timing are family-specific.

  • Tools and IP

    The design has to be rebuilt in the current toolchain, and IP cores may need replacing or re-licensing.

  • Temperature and lifetime

    Check the grade you need exists, and how long the new family is expected to stay in production.

Where a design cannot be revised — certified equipment, long-life industrial and defence builds — sourcing the original is normally the cheaper route, even at obsolete pricing.

Guides and comparisons