FPGA Market

Obsolete device

EP4SGX530 replacement options

The Intel EP4SGX530 has been discontinued by the manufacturer. There are two ways forward, and for most people reading this the first one is the answer: keep the design and source the part. Changing device means a board revision, so it is only worth it if you are redesigning anyway.

1. Keep the design — source the EP4SGX530

Discontinued parts are still traded. We hold 70 orderable EP4SGX530 parts — send the exact code and quantity and we'll come back with stock and pricing, including date-code and traceability requirements.

Request a quote
Part numberPackagePinsSpeedTemperature
EP4SGX530HH35C2GHH3511522Commercial
EP4SGX530HH35C2NHH3511522Commercial
EP4SGX530HH35C2ESHH3511522Commercial
EP4SGX530HH35C2HH3511522Commercial
EP4SGX530HH35C3ESHH3511523Commercial
EP4SGX530HH35C3GHH3511523Commercial
EP4SGX530HH35C3NHH3511523Commercial
EP4SGX530HH35C3NESHH3511523Commercial
EP4SGX530HH35C3HH3511523Commercial
EP4SGX530HH35I3NHH3511523Industrial
EP4SGX530HH35I3GHH3511523Industrial
EP4SGX530HH35I3HH3511523Industrial
EP4SGX530HH35I3NABHH3511523Industrial
EP4SGX530HH35C4GHH3511524Commercial
EP4SGX530HH35C4NHH3511524Commercial
EP4SGX530HH35C4HH3511524Commercial

All 70 EP4SGX530 parts

A different package or speed grade of the same device is the closest thing to a like-for-like change: the silicon is the same, so only the footprint or timing differs. It still needs checking against your board.

2. Redesigning? Current devices of similar capacity

Intel devices still in production with comparable logic capacity, closest first. These are a shortlist to evaluate, not equivalents: none of them is pin-compatible with the EP4SGX530, and none is recommended by the manufacturer as its successor. We select them by capacity from the data on this site.

DeviceFamilyLogic elementsvs EP4SGX530Block RAMDSPParts
EP4SGX530Stratix IV GX531,200The original27,376 Kb70
5SGSED6K2Stratix V GS583,0001.1× the logic elements45,000 Kb19
5SGSED6N2Stratix V GS583,0001.1× the logic elements45,000 Kb19
5SGSMD6K3Stratix V GS583,0001.1× the logic elements45,000 Kb18
5SGSED6K3Stratix V GS583,0001.1× the logic elements45,000 Kb17
5SGSED6N3Stratix V GS583,0001.1× the logic elements45,000 Kb16
5SGSMD6N2Stratix V GS583,0001.1× the logic elements45,000 Kb15

Substitutes listed by distributors

Parts distributors list as substitutes for the EP4SGX530. This is what the trade buys instead — not a manufacturer equivalence, and some are other vendors' silicon entirely. Check any of them against your design.

What to check before changing device

  • Footprint and pinout

    Ball count, pitch and pin assignment all differ between families. A new device means a new layout.

  • I/O voltages and banks

    Supported I/O standards, bank voltages and the number of banks change between generations.

  • Core and I/O supplies

    Newer devices usually run a lower core voltage and need a different power tree.

  • Configuration

    Flash type, configuration mode and boot timing are family-specific.

  • Tools and IP

    The design has to be rebuilt in the current toolchain, and IP cores may need replacing or re-licensing.

  • Temperature and lifetime

    Check the grade you need exists, and how long the new family is expected to stay in production.

Where a design cannot be revised — certified equipment, long-life industrial and defence builds — sourcing the original is normally the cheaper route, even at obsolete pricing.

Guides and comparisons