FPGA Market

Obsolete device

EP4SGX290 replacement options

The Intel EP4SGX290 has been discontinued by the manufacturer. There are two ways forward, and for most people reading this the first one is the answer: keep the design and source the part. Changing device means a board revision, so it is only worth it if you are redesigning anyway.

1. Keep the design — source the EP4SGX290

Discontinued parts are still traded. We hold 91 orderable EP4SGX290 parts — send the exact code and quantity and we'll come back with stock and pricing, including date-code and traceability requirements.

Request a quote
Part numberPackagePinsSpeedTemperature
EP4SGX290FF35C2XFF3511522Commercial
EP4SGX290FF35C2XGFF3511522Commercial
EP4SGX290FF35C2XNFF3511522Commercial
EP4SGX290FF35C3NFF3511523Commercial
EP4SGX290FF35C3FF3511523Commercial
EP4SGX290FF35C3GFF3511523Commercial
EP4SGX290FF35I3FF3511523Industrial
EP4SGX290FF35I3NFF3511523Industrial
EP4SGX290FF35I3GFF3511523Industrial
EP4SGX290FF35C4NFF3511524Commercial
EP4SGX290FF35C4FF3511524Commercial
EP4SGX290FF35C4GFF3511524Commercial
EP4SGX290FF35I4GFF3511524Industrial
EP4SGX290FF35I4NFF3511524Industrial
EP4SGX290FF35I4FF3511524Industrial
EP4SGX290FH29C2XFH297802Commercial

All 91 EP4SGX290 parts

A different package or speed grade of the same device is the closest thing to a like-for-like change: the silicon is the same, so only the footprint or timing differs. It still needs checking against your board.

2. Redesigning? Current devices of similar capacity

Intel devices still in production with comparable logic capacity, closest first. These are a shortlist to evaluate, not equivalents: none of them is pin-compatible with the EP4SGX290, and none is recommended by the manufacturer as its successor. We select them by capacity from the data on this site.

DeviceFamilyLogic elementsvs EP4SGX290Block RAMDSPParts
EP4SGX290Stratix IV GX291,200The original17,248 Kb91
5AGXMB1G4Arria V GX300,0001.0× the logic elements16,952 Kb21
5AGXBB1D4Arria V GX300,0001.0× the logic elements16,952 Kb19
5AGXFB1H4Arria V GX300,0001.0× the logic elements16,952 Kb17
5AGXBB1D6Arria V GX300,0001.0× the logic elements16,952 Kb6
5AGXMB1G6Arria V GX300,0001.0× the logic elements16,952 Kb6
5AGXFB1H6Arria V GX300,0001.0× the logic elements16,952 Kb4

Substitutes listed by distributors

Parts distributors list as substitutes for the EP4SGX290. This is what the trade buys instead — not a manufacturer equivalence, and some are other vendors' silicon entirely. Check any of them against your design.

What to check before changing device

  • Footprint and pinout

    Ball count, pitch and pin assignment all differ between families. A new device means a new layout.

  • I/O voltages and banks

    Supported I/O standards, bank voltages and the number of banks change between generations.

  • Core and I/O supplies

    Newer devices usually run a lower core voltage and need a different power tree.

  • Configuration

    Flash type, configuration mode and boot timing are family-specific.

  • Tools and IP

    The design has to be rebuilt in the current toolchain, and IP cores may need replacing or re-licensing.

  • Temperature and lifetime

    Check the grade you need exists, and how long the new family is expected to stay in production.

Where a design cannot be revised — certified equipment, long-life industrial and defence builds — sourcing the original is normally the cheaper route, even at obsolete pricing.

Guides and comparisons