FPGA Market

Obsolete device

EP4SGX180 replacement options

The Intel EP4SGX180 has been discontinued by the manufacturer. There are two ways forward, and for most people reading this the first one is the answer: keep the design and source the part. Changing device means a board revision, so it is only worth it if you are redesigning anyway.

1. Keep the design — source the EP4SGX180

Discontinued parts are still traded. We hold 61 orderable EP4SGX180 parts — send the exact code and quantity and we'll come back with stock and pricing, including date-code and traceability requirements.

Request a quote
Part numberPackagePinsSpeedTemperature
EP4SGX180DF29C2XNDF297802Commercial
EP4SGX180DF29C2XGDF297802Commercial
EP4SGX180DF29C2XDF297802Commercial
EP4SGX180DF29C3NDF297803Commercial
EP4SGX180DF29C3DF297803Commercial
EP4SGX180DF29C3GDF297803Commercial
EP4SGX180DF29I3NDF297803Industrial
EP4SGX180DF29I3DF297803Industrial
EP4SGX180DF29I3GDF297803Industrial
EP4SGX180DF29C4GDF297804Commercial
EP4SGX180DF29C4NDF297804Commercial
EP4SGX180DF29C4DF297804Commercial
EP4SGX180DF29I4GDF297804Industrial
EP4SGX180DF29I4NDF297804Industrial
EP4SGX180DF29I4DF297804Industrial
EP4SGX180FF35C2XGFF3511522Commercial

All 61 EP4SGX180 parts

A different package or speed grade of the same device is the closest thing to a like-for-like change: the silicon is the same, so only the footprint or timing differs. It still needs checking against your board.

2. Redesigning? Current devices of similar capacity

Intel devices still in production with comparable logic capacity, closest first. These are a shortlist to evaluate, not equivalents: none of them is pin-compatible with the EP4SGX180, and none is recommended by the manufacturer as its successor. We select them by capacity from the data on this site.

DeviceFamilyLogic elementsvs EP4SGX180Block RAMDSPParts
EP4SGX180Stratix IV GX175,750The original13,627 Kb61
5AGXBA5D4Arria V GX190,0001.1× the logic elements12,973 Kb18
5AGXMA5G4Arria V GX190,0001.1× the logic elements12,973 Kb16
5AGXFA5H4Arria V GX190,0001.1× the logic elements12,973 Kb10
5AGXMA5D4Arria V GX190,0001.1× the logic elements12,973 Kb8
5AGXBA5D6Arria V GX190,0001.1× the logic elements12,973 Kb6
5AGXMA5G6Arria V GX190,0001.1× the logic elements12,973 Kb4

Substitutes listed by distributors

Parts distributors list as substitutes for the EP4SGX180. This is what the trade buys instead — not a manufacturer equivalence, and some are other vendors' silicon entirely. Check any of them against your design.

What to check before changing device

  • Footprint and pinout

    Ball count, pitch and pin assignment all differ between families. A new device means a new layout.

  • I/O voltages and banks

    Supported I/O standards, bank voltages and the number of banks change between generations.

  • Core and I/O supplies

    Newer devices usually run a lower core voltage and need a different power tree.

  • Configuration

    Flash type, configuration mode and boot timing are family-specific.

  • Tools and IP

    The design has to be rebuilt in the current toolchain, and IP cores may need replacing or re-licensing.

  • Temperature and lifetime

    Check the grade you need exists, and how long the new family is expected to stay in production.

Where a design cannot be revised — certified equipment, long-life industrial and defence builds — sourcing the original is normally the cheaper route, even at obsolete pricing.

Guides and comparisons