FPGA Market

Obsolete device

EP2AGX125 replacement options

The Intel EP2AGX125 has been discontinued by the manufacturer. There are two ways forward, and for most people reading this the first one is the answer: keep the design and source the part. Changing device means a board revision, so it is only worth it if you are redesigning anyway.

1. Keep the design — source the EP2AGX125

Discontinued parts are still traded. We hold 44 orderable EP2AGX125 parts — send the exact code and quantity and we'll come back with stock and pricing, including date-code and traceability requirements.

Request a quote
Part numberPackagePinsSpeedTemperature
EP2AGX125DF25I3NDF255723Industrial
EP2AGX125DF25I3DF255723Industrial
EP2AGX125DF25C4DF255724Commercial
EP2AGX125DF25C4NDF255724Commercial
EP2AGX125DF25C5DF255725Commercial
EP2AGX125DF25C5NDF255725Commercial
EP2AGX125DF25I5NAADF255725Industrial
EP2AGX125DF25I5NDF255725Industrial
EP2AGX125DF25I5DF255725Industrial
EP2AGX125DF25C6DF255726Commercial
EP2AGX125DF25C6NDF255726Commercial
EP2AGX125EF29I3NEF297803Industrial
EP2AGX125EF29C4EF297804Commercial
EP2AGX125EF29C4NEF297804Commercial
EP2AGX125EF29C5NEF297805Commercial
EP2AGX125EF29C5GEF297805Commercial

All 44 EP2AGX125 parts

A different package or speed grade of the same device is the closest thing to a like-for-like change: the silicon is the same, so only the footprint or timing differs. It still needs checking against your board.

2. Redesigning? Current devices of similar capacity

Intel devices still in production with comparable logic capacity, closest first. These are a shortlist to evaluate, not equivalents: none of them is pin-compatible with the EP2AGX125, and none is recommended by the manufacturer as its successor. We select them by capacity from the data on this site.

DeviceFamilyLogic elementsvs EP2AGX125Block RAMDSPParts
EP2AGX125ARRIA II GX118,143The original8,121 Kb44
5CEFA7Cyclone V149,5001.3× the logic elements7,696 Kb23
5CEBA7Cyclone V149,5001.3× the logic elements7,696 Kb10
5CGXFC7D6Cyclone V149,5001.3× the logic elements7,696 Kb9
5CGXFC7C6Cyclone V149,5001.3× the logic elements7,696 Kb8
5CGTFD7C5Cyclone V149,5001.3× the logic elements7,696 Kb5
5CGTFD7D5Cyclone V149,5001.3× the logic elements7,696 Kb4

Substitutes listed by distributors

Parts distributors list as substitutes for the EP2AGX125. This is what the trade buys instead — not a manufacturer equivalence, and some are other vendors' silicon entirely. Check any of them against your design.

  • EP2AGX125DF25C4GAltera

What to check before changing device

  • Footprint and pinout

    Ball count, pitch and pin assignment all differ between families. A new device means a new layout.

  • I/O voltages and banks

    Supported I/O standards, bank voltages and the number of banks change between generations.

  • Core and I/O supplies

    Newer devices usually run a lower core voltage and need a different power tree.

  • Configuration

    Flash type, configuration mode and boot timing are family-specific.

  • Tools and IP

    The design has to be rebuilt in the current toolchain, and IP cores may need replacing or re-licensing.

  • Temperature and lifetime

    Check the grade you need exists, and how long the new family is expected to stay in production.

Where a design cannot be revised — certified equipment, long-life industrial and defence builds — sourcing the original is normally the cheaper route, even at obsolete pricing.

Guides and comparisons