FPGA Market

Obsolete device

A42MX24 replacement options

The Microchip A42MX24 has been discontinued by the manufacturer. There are two ways forward, and for most people reading this the first one is the answer: keep the design and source the part. Changing device means a board revision, so it is only worth it if you are redesigning anyway.

1. Keep the design — source the A42MX24

Discontinued parts are still traded. We hold 24 orderable A42MX24 parts — send the exact code and quantity and we'll come back with stock and pricing, including date-code and traceability requirements.

Request a quote
Part numberPackagePinsSpeedTemperature
A42MX24-1PL84IPL84841Industrial
A42MX24-1PL84MPL84841Military
A42MX24-1PL84PL84841
A42MX24-2PL84IPL84842Industrial
A42MX24-2PL84PL84842
A42MX24-3PL84IPL84843Industrial
A42MX24-FPL84PL8484F
A42MX24-1PQ160IPQ1601601Industrial
A42MX24-1PQ160MPQ1601601Military
A42MX24-1PQ160PQ1601601
A42MX24-2PQ160IPQ1601602Industrial
A42MX24-2PQ160PQ1601602
A42MX24-3PQ160IPQ1601603Industrial
A42MX24-3PQ160PQ1601603
A42MX24-FPQ160PQ160160F
A42MX24-1PQ208IPQ2082081Industrial

All 24 A42MX24 parts

A different package or speed grade of the same device is the closest thing to a like-for-like change: the silicon is the same, so only the footprint or timing differs. It still needs checking against your board.

What to check before changing device

  • Footprint and pinout

    Ball count, pitch and pin assignment all differ between families. A new device means a new layout.

  • I/O voltages and banks

    Supported I/O standards, bank voltages and the number of banks change between generations.

  • Core and I/O supplies

    Newer devices usually run a lower core voltage and need a different power tree.

  • Configuration

    Flash type, configuration mode and boot timing are family-specific.

  • Tools and IP

    The design has to be rebuilt in the current toolchain, and IP cores may need replacing or re-licensing.

  • Temperature and lifetime

    Check the grade you need exists, and how long the new family is expected to stay in production.

Where a design cannot be revised — certified equipment, long-life industrial and defence builds — sourcing the original is normally the cheaper route, even at obsolete pricing.

Guides and comparisons