FPGA Market

Obsolete device

A42MX09 replacement options

The Microchip A42MX09 has been discontinued by the manufacturer. There are two ways forward, and for most people reading this the first one is the answer: keep the design and source the part. Changing device means a board revision, so it is only worth it if you are redesigning anyway.

1. Keep the design — source the A42MX09

Discontinued parts are still traded. We hold 46 orderable A42MX09 parts — send the exact code and quantity and we'll come back with stock and pricing, including date-code and traceability requirements.

Request a quote
Part numberPackagePinsSpeedTemperature
A42MX09-1PL84IPL84841Industrial
A42MX09-1PL84MPL84841Military
A42MX09-1PL84PL84841
A42MX09-2PL84IPL84842Industrial
A42MX09-2PL84PL84842
A42MX09-3PL84IPL84843Industrial
A42MX09-3PL84PL84843
A42MX09-FPL84PL8484F
A42MX09-1PQ100IPQ1001001Industrial
A42MX09-1PQ100MPQ1001001Military
A42MX09-1PQ100PQ1001001
A42MX09-2PQ100IPQ1001002Industrial
A42MX09-2PQ100PQ1001002
A42MX09-3PQ100IPQ1001003Industrial
A42MX09-3PQ100PQ1001003
A42MX09-FPQ100PQ100100F

All 46 A42MX09 parts

A different package or speed grade of the same device is the closest thing to a like-for-like change: the silicon is the same, so only the footprint or timing differs. It still needs checking against your board.

What to check before changing device

  • Footprint and pinout

    Ball count, pitch and pin assignment all differ between families. A new device means a new layout.

  • I/O voltages and banks

    Supported I/O standards, bank voltages and the number of banks change between generations.

  • Core and I/O supplies

    Newer devices usually run a lower core voltage and need a different power tree.

  • Configuration

    Flash type, configuration mode and boot timing are family-specific.

  • Tools and IP

    The design has to be rebuilt in the current toolchain, and IP cores may need replacing or re-licensing.

  • Temperature and lifetime

    Check the grade you need exists, and how long the new family is expected to stay in production.

Where a design cannot be revised — certified equipment, long-life industrial and defence builds — sourcing the original is normally the cheaper route, even at obsolete pricing.

Guides and comparisons