FPGA Market

Obsolete device

A40MX04 replacement options

The Microchip A40MX04 has been discontinued by the manufacturer. There are two ways forward, and for most people reading this the first one is the answer: keep the design and source the part. Changing device means a board revision, so it is only worth it if you are redesigning anyway.

1. Keep the design — source the A40MX04

Discontinued parts are still traded. We hold 61 orderable A40MX04 parts — send the exact code and quantity and we'll come back with stock and pricing, including date-code and traceability requirements.

Request a quote
Part numberPackagePinsSpeedTemperature
A40MX04-1PL44IPL44441Industrial
A40MX04-1PL44MPL44441Military
A40MX04-1PL44PL44441
A40MX04-2PL44IPL44442Industrial
A40MX04-2PL44PL44442
A40MX04-3PL44IPL44443Industrial
A40MX04-3PL44PL44443
A40MX04-FPL44PL4444F
A40MX04-1PL68IPL68681Industrial
A40MX04-1PL68MPL68681Military
A40MX04-1PL68PL68681
A40MX04-2PL68IPL68682Industrial
A40MX04-2PL68PL68682
A40MX04-3PL68IPL68683Industrial
A40MX04-3PL68PL68683
A40MX04-FPL68PL6868F

All 61 A40MX04 parts

A different package or speed grade of the same device is the closest thing to a like-for-like change: the silicon is the same, so only the footprint or timing differs. It still needs checking against your board.

What to check before changing device

  • Footprint and pinout

    Ball count, pitch and pin assignment all differ between families. A new device means a new layout.

  • I/O voltages and banks

    Supported I/O standards, bank voltages and the number of banks change between generations.

  • Core and I/O supplies

    Newer devices usually run a lower core voltage and need a different power tree.

  • Configuration

    Flash type, configuration mode and boot timing are family-specific.

  • Tools and IP

    The design has to be rebuilt in the current toolchain, and IP cores may need replacing or re-licensing.

  • Temperature and lifetime

    Check the grade you need exists, and how long the new family is expected to stay in production.

Where a design cannot be revised — certified equipment, long-life industrial and defence builds — sourcing the original is normally the cheaper route, even at obsolete pricing.

Guides and comparisons